Azbil Model MQV- _ _ _ _ Digital Mass Flow Controller for Hydrogen and Helium Gases features high-performance mass flow controllers that incorporate a thermal mass flow sensor developed by Azbil Corporation, the µF (Micro Flow) sensors, in addition to a proportional solenoid valve and advanced actuator control technology. Advanced 300 ms* high speed control can be used for low differential pressure work. The ultra-high-speed response Micro Flow sensor and unique PID tuning realize exceptionally high-speed response in reaching the set flow rate from a fully closed state. The model MQV_ _ _ _ also responds quickly to changes in the primary pressure, minimizing the effect on the flow rate on the secondary side. Selectable control range, power circuit isolation, and emphasis on usability. The model MQV_ _ _ _ does not use capillaries that have large pressure loss, so the model MGV can control in the low pressure difference. The model MQV_ _ _ _ comes with a multitude of standard functions such as flow rate, indication and totalizing. A convenient personal computer loader function has been integrated as a standard feature. The MLP loader software, which is sold separately, allows not only configuration of various settings, but also monitoring of flow rate trends and other operating status information on the PC screen. Acquired data can also be saved on a CSV file. The power circuit is isolated from analog I/O circuits. If multiple MQV_ _ _ _ controllers are connected to analog I/O by a PLC or the like, there is no need to use an isolated circuit in the analog module on the PLC side. A common power supply can be used to supply power to the controller. MQV_ _ _ _ controllers can operate at a allow differential pressure of 50 kPa or less. An AC adaptor is available that is suitable for use in laboratory setting or for similar application. Models with a integrated display, the display direction can be changed 180 degrees. Pipe size (B) ¼” and ½”. Flow range .5 L/min to 200 L/min. Operating temperature 14 °F (-10 °C) to 140 °F (60 °C). Operating humidity 10 to 90% RH, no condensation allowed. Output 0-5V dc / 1 – 5 V dc / 0-20MA dc 4 – 20 mA dc (selectable). CE approved.
*500 ms for the model MQV9005/9200/9050B and C, 700 ms for the model MQV0050/0200/0500/1000J and K